En
Ru
Back to the devices list

Passer-V data acquisition device

PSSRV2
800000,00
RUB
Add to cart
The Passer-V data acquisition device is designed for measuring, monitoring and recording vibration signals coming from sensors, as well as generating output discrete and digital signals for their use in monitoring and control systems of technical facilities.

The scope of the device - as part of measurement systems and diagnostics of technological equipment in industrial enterprises.

lwh: 160x103x61 mm

Weight: 340 g

Functions performed
Technical specifications
Input/Output characteristics

Functions performed

  • measurement of vibration acceleration;
  • vibration velocity measurement;
  • measurement of vibration displacement;
  • calculation of vibration spectra;
  • calculation of diagnostic parameters from vibration spectra;
  • measurement of shaft rotation speed;
  • alarm when exceeding the threshold values of the parameters.

Technical specifications

  • The instrument has 8 analog inputs for measuring analog voltage signals.
  • The device has 2 digital inputs for connecting tachometers and 2 digital outputs.
  • The time for setting the operating mode of the device is not more than 30 seconds.
  • Continuous and round-the-clock operation mode.
  • The product must be powered from a 24 V ±5 V DC power source%
  • The power consumption of the device is not more than 1 O W.
  • The product weight is not more than 400 grams.
  • Operating temperature range of the product from minus 25 to plus 50°C.
  • According to the type of climatic design, the product corresponds to category C4 according to GOST R 52931-2008.
  • In terms of resistance to atmospheric pressure, the product corresponds to the performance group P1 according to GOST R 52931-2008.
  • In terms of resistance to sinusoidal vibrations, the product corresponds to the performance group N2 according to GOST R 52931-2008.
  • The degree of protection provided by the shell according to GOST 14254 -2015, IP20.

Input/Output characteristics

Digital inputs:
Pulse frequency measurement range - 0 - 1 MHz
Logical unit voltage - 5 V
Logical zero voltage - 0 - 1, 1 V
Minimum pulse duration - 4 microseconds

Analog inputs:
Voltage measurement range - 0 - 30 V
Sample rate - 100 kHz
Frequency range - 4000 Hz
The limit of permissible reduced error - ±0.3%

Digital outputs:
Switching voltage - 32 V
Switched current - 400 mA
Closed state resistance - 2 ohms