Development of devices from the company "Liman-Tech"
Vibration data acquisition device "PASSER -V"
Synchronous collection of vibration data from 8 channels and processing on the device with an assessment of the state according to GOST ISO 10816, as well as performing diagnostics and predictive analysis.
The ability to combine an unlimited number of 8-channel data acquisition modules into one system. It doesn't require connecting to the server and purchasing additional\software.
Analytics data, events, and warnings are displayed in the web interface, with the ability to connect from any device, and can also be sent via SMS, emails,and messages to instant messengers.
Transmission can be performed either via Modbus protocols or via an OPC UA connection.
The ability to combine an unlimited number of 8-channel data acquisition modules into one system. It doesn't require connecting to the server and purchasing additional\software.
Analytics data, events, and warnings are displayed in the web interface, with the ability to connect from any device, and can also be sent via SMS, emails,and messages to instant messengers.
Transmission can be performed either via Modbus protocols or via an OPC UA connection.
- Number of channels8 / 16 / 24 / 32
- Speed measurement channels2 / 4 / 6 / 8
- Types of sensorsICP, U
- Frequency range0-40 000 Hz
- Dynamic range24 bits
- Sample Rate100kHz
- Number of lines in the spectrumfrom 200 to 102400
- Memory16GB
- Temperature range-20°C to 70°C
- Degree of protectionIP20
- Local Area NetworkEthernet TCP/IP, 10/100 Mbps
- InterfacesOPC UA (DA), Modbus RTU & TCP/IP
- Envelope measurementyes
- Filters for the envelope100, 200, 500, 1000, 2000, 5000, 10 000 Hz
- Window functions for FFTHenning Window
- Averaging optionsLinear, exponential, with peak retention
- Digital outputs2 status outputs and 4 user configurable
- Individual characteristics, special diagnostic methodsProcessing on the controller:
SKZ 10 - 1000 Hz (any other bands) - Speed, Acceleration, Movement - up to 100 parameters once per second synchronously on each channel + Modbus TCP transmission
The Passer-V device is a part of the Passer intelligent diagnostic system
Passer-V data acquisition devices provide measurement and analog-to-digital conversion of vibration signals.
Accelerometers of the ICP standard or eddy current relative vibration sensors can be used as vibration sensors.
Would you like to try out our VIBRATION diagnostic system?
Leave your email address and we will get back to you
By clicking on the button, you consent to the processing of personal data and agree to our privacy policy
